Using Raspberry Pi 4, Raspberry Pi OS, and Docker to Connect Home Assistant with a Eufy IndoorCam 2K Pan & Tilt and Save Images When a Pet Is Detected

📰 Dev.to · vast cow

Connect Home Assistant with Eufy IndoorCam 2K using Raspberry Pi 4, Raspberry Pi OS, and Docker to automate pet detection and image saving

intermediate Published 23 Apr 2026
Action Steps
  1. Install Raspberry Pi OS on Raspberry Pi 4
  2. Configure Docker on Raspberry Pi OS
  3. Set up Home Assistant using Docker
  4. Integrate Eufy IndoorCam 2K with Home Assistant
  5. Configure automation to save images when a pet is detected
Who Needs to Know This

Home automation enthusiasts and developers can benefit from this tutorial to integrate their security cameras with Home Assistant and automate tasks

Key Insight

💡 Use Raspberry Pi 4, Raspberry Pi OS, and Docker to connect Home Assistant with Eufy IndoorCam 2K and automate pet detection

Share This
Automate pet detection with Eufy IndoorCam 2K & Home Assistant using Raspberry Pi 4 & Docker! #homeautomation #iot
Read full article → ← Back to Reads